Search our shop

    A Complete Guide on How to Charge a Battery from Solar Panels

    • 5 min read

    If you've been looking for an eco-friendly and sustainable way to power your devices, then charging from solar panels may be the answer! With a solar panel system, you have access to an energy source that’s virtually endless and renewable. In this blog post, we'll provide you with an in-depth guide on how to charge a battery from solar panels. Also, we'll discuss the components of a solar charging system and how to set up a solar system. Read on to explore more about charging batteries with solar power!

    How do Solar Panels Convert Sunlight into Electricity?

    When it comes to converting sunlight into electricity, the charge controller is an essential part, acting as a regulator of energy between the solar panels and the battery. When sunlight hits the solar panels, it generates a direct current (DC), which flows through the charge controller before reaching the battery, controlling the flow of the current before charging the battery. This way, the charge controller ensures that the battery is not under or overcharged while also preventing it from deteriorating too quickly.

    What Are the Components of a Solar Charging System

    To set up a functional solar charging system, you need a few essential components: a solar panel to absorb energy from the sun and convert it into electricity; a charge controller to regulate the amount of electricity flowing into the battery to prevent overcharging or undercharging; and a battery to store the electricity. The following is an in-depth guide to help you choose these components.

    How to Choose the Right Solar Panel

    One of the essential factors to consider is its wattage. The wattage refers to the amount of power the solar panel can generate per hour, and you may want a solar panel with enough wattage like 200W to produce enough power to support your home's energy needs.

    In addition to wattage, it's important to consider the panel's efficiency. A highly efficient solar panel can convert a greater percentage of sunlight into electricity, which means you'll get more energy from each panel. Most panels have an average conversion efficiency rate of 15%-20%, while Anker 531 Solar Panel has a higher conversion efficiency rate - up to 23%.

    It's also important to consider the panel's compatibility with batteries. By choosing a solar panel that is compatible with batteries, you can maximize the use of power generated during daylight hours.

    How to Choose the Right Battery

    Lead-acid, lithium-ion, and LFP (lithium-iron-phosphate) batteries are the most commonly used batteries for solar power storage.

    Lead-acid batteries are the most traditional type, and they are the cheapest of the three. However, they are also the heaviest and have the shortest lifespan.

    Lithium-ion batteries, on the other hand, are more expensive, but they have a longer lifespan and are lightweight, making them ideal for portability. However, they are not as reliable as the others and require more careful maintenance.

    LFP batteries, also known as Lithium Iron Phosphate batteries, are the most expensive option, but they have the longest lifespan and can handle heavy loads without damage. They are also the safest and do not require as much maintenance as the other two, which makes them the best option for the solar system.

    How to Choose the Right Charge Controller

    When it comes to choosing the right charge controller for your solar charging system, there are two main options: PWM and MPPT charge controllers.

    PWM (Pulse Width Modulation) controllers are generally less expensive and simpler to install, making them a good option for smaller systems. They regulate the charging process by sending short pulses of current to the battery, which can sometimes result in a lower charging efficiency.

    MPPT (Maximum Power Point Tracking) charge controllers are often more expensive but provide increased efficiency by tracking the optimal power point of the system and adjusting accordingly. This results in a higher overall efficiency, making them a good choice for larger systems. However, they do require more complex installation and setup.

    When choosing between the two, it's important to consider factors such as the size of your system, budget, and required efficiency.

    How to Set Up a Solar Charging System

    To maximize the efficiency of solar battery charging, it’s crucial to properly set up a solar charging system with the components we mentioned in the last section. And here are some tips you need to know:

    Placement of solar panels: Solar panels work best when they receive direct sunlight, so make sure they are placed in an area where they can catch the most sunlight throughout the day.

    Installation and connection of components: Make sure the solar panels are properly mounted and connected to the charge controller. This will allow the charge controller to regulate the voltage and current of the solar panels, which is essential to ensure that the battery is charged properly and efficiently.

    Proper wiring: Proper wiring and safety precautions are key to ensuring that your solar charging system functions smoothly and safely. Always use appropriate wires and connectors that are specially designed for solar applications, and ensure that all connections are securely tightened.

    An All-in-One Solution: Anker Solar Generator

    If you find it difficult to set up a solar system and would like to look for an all-in-one solution, the Anker solar generator is definitely worth checking out. Each Anker solar generator includes one or more portable solar panels and a portable power station equipped with a built-in MPPT controller. This means that you don't need to spend time choosing solar panels, batteries, and charge controllers.

    The Anker 767 Solar Generator is one of the most popular options for solar charging. With a 2400W power station and three 100W solar panels, this generator is capable of providing a steady stream of power for households and outdoor trips.

    {{ component: "product", handle: "b178011f", sku: "B178011F"}}

    Featured with Anker’s proprietary Suncast technology, the solar panel can be adjusted properly to capture direct sunlight for the optimal charge. And each panel has short-circuit and over-voltage protection, which keeps your solar charging system safe. Besides, the panel comes with an ultra-tough finish that’s scratch and weather resistant, making it long-lasting and durable.

    Apart from good-quality solar panels, the powerful power station is worthy as well. With a 2048Wh capacity and 12 versatile ports, it can power all your essential devices, from smartphones and laptops to electric grills and microwaves. Apart from that, combined with EV-grade FLP batteries, this power station can stay in good condition for a maximum of 3,000 times of charging or the equivalent of a decade of utilization.


    Overall, this complete guide on how to charge a battery from solar panels will hopefully provide you with enough information about the solar charging system. If you’re considering this system, it's important to do research into what type of solar panels and batteries will work for your needs. Proper planning and installation are key elements of success in creating a self-sustaining system. Of course, if you want to save some effort, you’d better invest in an all-in-one solution like Anker 767 Solar Generator, which is also a good method for you to reap the benefits of solar energy for years to come.